{"id":2971,"date":"2026-06-05T14:44:20","date_gmt":"2026-06-05T06:44:20","guid":{"rendered":"http:\/\/www.okastrology.com\/blog\/?p=2971"},"modified":"2026-06-05T14:44:20","modified_gmt":"2026-06-05T06:44:20","slug":"what-is-the-process-of-making-resin-ornaments-step-by-step-4a61-4a8682","status":"publish","type":"post","link":"http:\/\/www.okastrology.com\/blog\/2026\/06\/05\/what-is-the-process-of-making-resin-ornaments-step-by-step-4a61-4a8682\/","title":{"rendered":"What is the process of making resin ornaments step by step?"},"content":{"rendered":"

Hey there! I’m a supplier of resin ornaments, and I’m super stoked to share with you the step-by-step process of making these awesome little trinkets. It’s a journey filled with creativity, precision, and a whole lot of fun. So, let’s dive right in! Resin Ornaments<\/a><\/p>\n

<\/p>\n

Step 1: Gathering Materials<\/h3>\n

First things first, you gotta get all your materials together. You’ll need resin, of course. There are different types of resin out there, but I usually go for epoxy resin because it’s easy to work with and gives a really clear finish. You’ll also need a mixing cup, stir sticks, a mold, and any additives or pigments you want to use to color your ornaments.<\/p>\n

I always make sure to have a good supply of materials on hand. It’s a pain to stop in the middle of a project because you ran out of something. And trust me, I’ve been there! So, stock up and be prepared.<\/p>\n

Step 2: Preparing the Mold<\/h3>\n

Once you’ve got your materials, it’s time to prep the mold. You want to make sure it’s clean and dry before you pour in the resin. I like to use a little bit of mold release spray to make it easier to pop the ornament out later. Just give the mold a light coat and let it dry for a few minutes.<\/p>\n

If you’re using a silicone mold, you can skip the mold release spray. Silicone molds are pretty non-stick on their own. But if you’re using a plastic or metal mold, it’s definitely a good idea to use the spray.<\/p>\n

Step 3: Mixing the Resin<\/h3>\n

Now comes the fun part – mixing the resin! You’ll need to follow the instructions on the resin package carefully. Usually, you’ll have to mix a resin and a hardener together in a specific ratio. I like to use a digital scale to make sure I get the ratio just right.<\/p>\n

Once you’ve measured out the resin and hardener, pour them into the mixing cup. Use a stir stick to mix them together thoroughly. You want to make sure there are no streaks or clumps. Keep stirring for a few minutes until the mixture is smooth and uniform.<\/p>\n

Step 4: Adding Pigments and Additives<\/h3>\n

If you want to add some color or sparkle to your ornaments, this is the time to do it. You can use resin pigments, mica powders, or even glitter. Just add a little bit at a time and stir well to distribute the color evenly.<\/p>\n

I like to experiment with different colors and combinations to create unique and eye-catching ornaments. You can also add some dried flowers, shells, or other small objects to give your ornaments a more natural and organic look.<\/p>\n

Step 5: Pouring the Resin<\/h3>\n

Once your resin is mixed and colored, it’s time to pour it into the mold. Be careful not to pour too quickly or you’ll get air bubbles. I like to pour the resin slowly and steadily, starting from one corner of the mold and working my way across.<\/p>\n

If you do get some air bubbles, you can use a toothpick or a heat gun to pop them. Just be careful not to overheat the resin or it will start to cure too quickly.<\/p>\n

Step 6: Curing the Resin<\/h3>\n

After you’ve poured the resin into the mold, it’s time to let it cure. This usually takes a few hours or overnight, depending on the type of resin you’re using. Make sure to follow the instructions on the resin package for the recommended curing time.<\/p>\n

While the resin is curing, it’s important to keep the mold in a warm and dry place. You don’t want it to be exposed to any drafts or moisture, as this can affect the curing process.<\/p>\n

Step 7: Removing the Ornament from the Mold<\/h3>\n

Once the resin is fully cured, it’s time to remove the ornament from the mold. Gently flex the mold to loosen the ornament, and then carefully pop it out. If the ornament is stuck, you can use a little bit of warm water to help loosen it.<\/p>\n

Be careful not to damage the ornament when you’re removing it from the mold. It’s a good idea to wear gloves to protect your hands and to handle the ornament gently.<\/p>\n

Step 8: Finishing Touches<\/h3>\n

After you’ve removed the ornament from the mold, you can give it a little bit of a polish to make it shine. You can use a soft cloth or a polishing compound to buff the surface of the ornament.<\/p>\n

You can also add some finishing touches, such as a hanging loop or a ribbon. This will make your ornament more decorative and easier to display.<\/p>\n

Step 9: Quality Control<\/h3>\n

Before you package your ornaments for sale, it’s important to do a quality control check. Look for any flaws or defects in the ornament, such as air bubbles, cracks, or uneven surfaces. If you find any issues, you can try to fix them or discard the ornament.<\/p>\n

I always make sure to inspect each ornament carefully to ensure that it meets my standards. I want my customers to be happy with their purchases, so I take pride in the quality of my products.<\/p>\n

Step 10: Packaging and Shipping<\/h3>\n

Once you’ve completed the quality control check, it’s time to package your ornaments for sale. You can use a variety of packaging materials, such as boxes, bags, or envelopes. Make sure to protect the ornament from damage during shipping by using bubble wrap or packing peanuts.<\/p>\n

<\/p>\n

I like to add a little bit of personal touch to my packaging, such as a thank-you note or a small gift. This makes my customers feel appreciated and helps to build a good relationship with them.<\/p>\n

Resin Medium Photo Frame<\/a> And that’s it! That’s the step-by-step process of making resin ornaments. It’s a fun and rewarding hobby, and it’s also a great way to make some extra money. If you’re interested in purchasing some of our resin ornaments, or if you have any questions about the process, please don’t hesitate to contact us. We’d love to hear from you!<\/p>\n

References<\/h3>\n