{"id":3577,"date":"2026-10-09T04:45:23","date_gmt":"2026-10-08T20:45:23","guid":{"rendered":"http:\/\/www.okastrology.com\/blog\/?p=3577"},"modified":"2026-10-09T04:45:23","modified_gmt":"2026-10-08T20:45:23","slug":"are-pipe-tees-available-in-custom-sizes-4685-3eaa67","status":"publish","type":"post","link":"http:\/\/www.okastrology.com\/blog\/2026\/10\/09\/are-pipe-tees-available-in-custom-sizes-4685-3eaa67\/","title":{"rendered":"Are Pipe Tees available in custom sizes?"},"content":{"rendered":"

Hey everyone, this is Jake from the pipe fittings team, and today I\u2019m answering one of the most common questions I get from plumbers, construction foremen, and process engineers who reach out to me every week: Are pipe tees available in custom sizes? Pipe Tee<\/a><\/p>\n

<\/p>\n

I\u2019ll be honest\u2014when I first started in this business, I assumed all pipe tees were one-size-fits-all, right off the shelf, cut to whatever length and angle you need on-site. But over the past 12 years I\u2019ve spent sourcing, testing, and selling pipe tees, I\u2019ve learned that\u2019s far from the truth. Most people don\u2019t realize that standard pipe tees work for the basics\u2014a 3-inch tee for a 3-inch schedule 40 pipe, a 90-degree side outlet, that sort of thing\u2014but when your project has a weird offset, a unique pressure rating, or a pipe material that\u2019s not stock, off-the-shelf just doesn\u2019t cut it. Let\u2019s break this down, because if you\u2019re here, you\u2019ve probably run into that frustrating dead end where a stock fitting doesn\u2019t match exactly what you need.<\/p>\n

First, let\u2019s get clear on what a custom pipe tee even is, because the term gets thrown around a lot. A standard pipe tee is three equal or sized outlets, typically 90 degrees apart, made to match standardized pipe schedules (Schedule 40, 80, 10, etc.) and nominal pipe sizes (NPS). Custom tees, on the other hand, deviate from those standards in a few key ways: they can have unequal outlet sizes, non-standard branch angles (not 90 degrees), different pressure ratings, or even be made from materials that aren\u2019t kept in stock for quick pickup. For example, if you\u2019re working on a food processing plant that needs a stainless steel tee that fits a 2-inch main line but has a 1.25-inch branch\u2014something that\u2019s not a nominal 1.5-inch size\u2014you can\u2019t grab that from the local supply house. That\u2019s where custom comes in.<\/p>\n

Now, I know some of you are probably thinking, \u201cCan\u2019t I just cut a standard tee to fit what I need?\u201d And yeah, you can, but that\u2019s a band-aid that almost always leads to problems. Cutting a standard tee changes the wall thickness, compromises its pressure rating, and introduces weak points where leaks can start, especially in high-pressure applications like oil and gas lines, or even in fire sprinkler systems where reliability is non-negotiable. I\u2019ve seen too many projects skip the custom tee step, cut a standard one, and end up tearing out a section of pipe a month later because of a leak. That\u2019s why custom tees aren\u2019t a luxury\u2014they\u2019re a necessity for specialized work.<\/p>\n

What kinds of custom sizes do we actually handle at our shop, and what do clients usually ask for? Let\u2019s get specific here, because generic answers don\u2019t help anyone. First, unequal outlet tees. A lot of process engineers need what\u2019s called a \u201creducing tee,\u201d but even reducing tees go beyond standard sizes. For example, a 6x4x2 tee\u2014where the main line is 6 inches, one branch is 4 inches, and the other is 2 inches\u2014standard reducing tees top out at certain size ratios, but if you need a 10x3x8 tee, that\u2019s not stock. Then there are non-standard nominal sizes. Most pipe comes in even nominal sizes, but occasionally you\u2019ll have a project that uses a custom pipe size for a niche application, like a specialty chemical plant that uses 2.75-inch pipe for a line with corrosive materials. A custom tee for that size has to match the exact outer diameter, wall thickness, and thread or groove type of that odd pipe, which you can\u2019t get off the shelf.<\/p>\n

We also do custom tees for specialty pressure and temperature ratings. Standard tees are rated for, say, 150 PSI at room temperature, but if you\u2019re working in a refinery where lines run at 500 degrees Fahrenheit, you need a tee rated for a specific pressure at that high temp, and that often requires custom forging or machining to meet the code requirements\u2014like ASME B16.9, which is the standard for factory-made wrought butt-welding fittings. Wait, speaking of codes, that\u2019s a big point I don\u2019t want to skip: any custom pipe tee has to meet industry codes, right? You can\u2019t just make a random tee and call it safe. So when we quote a custom tee, we make sure it adheres to ASME, ASTM, ISO, or whatever codes your project requires, whether that\u2019s for potable water, industrial process piping, or structural applications.<\/p>\n

A question I get a lot is: how long does it take to get a custom pipe tee? And that\u2019s a fair one, because on-site projects often have tight deadlines. The short answer is, it depends on the size and material, but it\u2019s way faster than you might think\u2014most custom orders take between 2 and 4 weeks, compared to 1 to 2 days for stock fittings. But wait, you\u2019re probably thinking, why can\u2019t it be same-day? Because custom tees aren\u2019t sitting in a warehouse ready to go. They have to be cut, formed, welded (if it\u2019s a fabricated tee) or forged, inspected, and tested to make sure it meets your exact specs. For example, if you order a custom stainless steel tee, we start with a solid billet of 316 stainless, machine the three outlets to your exact dimensions, pressure test it to ensure no defects, and ship it out. That takes time, but it\u2019s worth it to avoid the hassle of a bad fit or a leak.<\/p>\n

Let me also address the common misconception that custom pipe tees are way more expensive than standard ones. Yeah, there\u2019s a markup, but it\u2019s not as big as you\u2019d think. For a small project that only needs one custom tee, the cost difference might be a few hundred dollars, but when you compare that to the cost of tearing out a bad cut tee, shutting down a line, or failing an inspection, it\u2019s a no-brainer. I had a client last year who was working on a brewery\u2019s new fermenting line\u2014they tried to cut a standard tee to fit their 1.5-inch and 1-inch sanitary lines, and within two weeks, they had a leak that shut down the entire bottling line. The cost of that downtime? Over $15,000. Replacing that bad cut with a custom sanitary tee would have cost less than $500, and avoided all that headache. That\u2019s the kind of story that sticks with me, and it\u2019s why I always tell people: don\u2019t cut corners on custom fittings when your project\u2019s on the line.<\/p>\n

Now, not every project needs a custom tee, obviously. If you\u2019re doing a standard residential plumbing job, replacing a leaky tee that\u2019s 3-inch schedule 40, you can grab a standard one from the hardware store. But if you\u2019re working on a commercial project, a process line, a specialty application, or have unique dimensions, custom is the way to go. Let\u2019s talk about what you need to provide when you order a custom pipe tee, because if you walk in with just \u201cI need a custom tee,\u201d that\u2019s not enough. You need to give us: the nominal pipe sizes of each outlet (or exact outer diameters if they\u2019re non-standard), the type of connection\u2014threaded, grooved, butt-weld, socket-weld, sanitary flange, whatever, the material (carbon steel, stainless steel, brass, PVC, etc.), the pressure and temperature rating it needs to handle, and any industry codes it has to meet. The more specific you are, the faster we can quote you and get the right tee made.<\/p>\n

Wait, I should also mention that we do more than just unequal outlet tees. We also make custom tees with custom angles\u2014instead of the standard 90-degree branch, we can make a 45-degree tee, a 60-degree tee, even something as specific as a 15-degree offset tee for a line that needs to route around an existing beam or structure. Those are often overlooked, but they\u2019re game-changers for projects where every inch counts. I had a construction foreman a few months back working on a hospital\u2019s HVAC piping system\u2014they had a tight space between two walls, and a standard 90-degree tee wouldn\u2019t fit, but a custom 75-degree tee let them route the line perfectly without having to modify the walls. That saved them days of work, which is huge when you\u2019re on a strict hospital project timeline.<\/p>\n

Let me also touch on quality control, because that\u2019s something we take very seriously. When you order a custom pipe tee from us, every one goes through two inspections: first, during the manufacturing process, we check the dimensions and material to make sure it\u2019s matching your specs, then after completion, we do a pressure test, a leak test, and for specialty materials, we do a material test to confirm it\u2019s the grade you ordered. For example, if you order a 304 stainless steel tee, we\u2019ll do a PMI (positive material identification) test to make sure it\u2019s not a cheaper alloy that will corrode in your application. That level of quality is what separates custom tees from the ones you might get from a random online supplier, and it\u2019s why we have repeat clients who come back to us for every custom fitting they need.<\/p>\n

I know some of you are hesitant to go the custom route, maybe because you\u2019ve had bad experiences with custom parts in the past that were overpriced or didn\u2019t fit right. That\u2019s why we make the process as simple as possible for clients: we work with you from the initial quote all the way to delivery, answering every question, walking you through the design if needed, and making sure the final product is exactly what you need. No hidden fees, no fine print, just a fitting that works for your project.<\/p>\n

At the end of the day, custom pipe tees aren\u2019t some exotic, hard-to-get part\u2014they\u2019re a standard solution for when standard fittings fall short. Whether you\u2019re a plumber working on a unique residential remodel, an engineer designing a new industrial process line, or a foreman handling a large commercial project, there\u2019s a custom pipe tee that will fit your exact needs, and it\u2019s more accessible than you might think.<\/p>\n

<\/p>\n

If you\u2019re currently working on a project and you\u2019re not sure if a standard tee will work, or you\u2019ve already run into issues with a part that doesn\u2019t fit, don\u2019t hesitate to reach out to our team. We\u2019re here to answer your questions, walk you through the custom ordering process, and make sure you get the right fitting on time and on budget. Let\u2019s make your project run smoothly, no leaks, no delays, no headaches.<\/p>\n

\n

BS Flanges<\/a> References:
\nASME B16.9 – Factory-Made Wrought Butt-Welding Fittings
\nASTM A234 – Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High-Temperature Service
\nISO 148-1 – Metallic materials – Charpy pendulum impact test – Part 1: Test method<\/p>\n

\n

Hebei Haihao Group Huadian High Pressure Pipe Fittings Co., Ltd.<\/a>
As one of the most professional pipe tee manufacturers and suppliers in China, we are able to meet the needs of the majority of our customers. Please rest assured to wholesale high quality pipe tee made in China here from our factory. For price consultation, contact us.
Address: Donglin Industrial Zone, Mengcun County, Cangzhou City, Hebei Province, China
E-mail: haihaohuadian@outlook.com
WebSite: https:\/\/www.hhfittings.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

Hey everyone, this is Jake from the pipe fittings team, and today I\u2019m answering one of … Are Pipe Tees available in custom sizes?<\/span>Read more<\/a><\/p>\n","protected":false},"author":179,"featured_media":3577,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3540],"class_list":["post-3577","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-pipe-tee-4207-3ef091"],"_links":{"self":[{"href":"http:\/\/www.okastrology.com\/blog\/wp-json\/wp\/v2\/posts\/3577","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.okastrology.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.okastrology.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.okastrology.com\/blog\/wp-json\/wp\/v2\/users\/179"}],"replies":[{"embeddable":true,"href":"http:\/\/www.okastrology.com\/blog\/wp-json\/wp\/v2\/comments?post=3577"}],"version-history":[{"count":0,"href":"http:\/\/www.okastrology.com\/blog\/wp-json\/wp\/v2\/posts\/3577\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.okastrology.com\/blog\/wp-json\/wp\/v2\/posts\/3577"}],"wp:attachment":[{"href":"http:\/\/www.okastrology.com\/blog\/wp-json\/wp\/v2\/media?parent=3577"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.okastrology.com\/blog\/wp-json\/wp\/v2\/categories?post=3577"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.okastrology.com\/blog\/wp-json\/wp\/v2\/tags?post=3577"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}